How to Install Your Craftiva Rotating Wood Slat Divider – A Step-by-Step Guide

Now that you’ve received your Craftiva Rotating Wood Slat Divider, it's time to install it and bring your design vision to life. Whether you're using it to create visual separation in an open-plan space, add privacy to a shared room, or introduce a modern design element, this guide will walk you through the installation process step by step.

Your divider includes individually rotatable 360° wood slats, which allow you to adjust the level of openness or privacy at any time. The product is available in two installation formats:

• A rotational base (freestanding, with built-in sockets for the slats)
• A fixed installation (floor-to-ceiling mounting without a base)

This guide covers both methods in detail and includes all necessary preparation tips and pro techniques to ensure a smooth, secure installation.

🧾 What’s Included in Your Order

Depending on your selected configuration, your package will include:

• The number of solid Red Oak wood slats you ordered (cut to your specified height)
• Either: A rotational base and header with pre-drilled sockets (for freestanding installation), or Floor and ceiling U-channels/brackets (for fixed installation)
• A rotational base with pre-drilled sockets (for freestanding installation), or
• Floor and ceiling U-channels/brackets (for fixed installation)
• Steel pivot pins pre-installed in each slat
• Optional top guide bar or plate (used in both methods for added alignment)
• A printed installation guide
• (Optional) Access to an installation video—request via email: sales@craftivaart.com

🧰 Tools You May Need

Make sure to have these tools ready before you begin:

📐 How to Calculate the Number of Slats

If you haven’t already, here’s a quick way to confirm the number of slats you need:

1. Measure the total width of the area where the divider will be installed (in inches)
2. Divide by 4.19685" (the width + spacing of each slat)
3. Round down to the nearest whole number

Example: 100" ÷ 4.19685" = 23.83 → You need 24 slats

If you’re unsure, you can always call (437) 328-3350 or email craftivaart@gmail.com for assistance.

🛠 Method 1: Installation Using the Rotational Base (Freestanding)

This method is ideal for renters or spaces where permanent floor/ceiling drilling isn’t preferred.

🔹 Step 1: Choose Location

Pick a flat, clean surface where you’d like to place the divider. Ensure it’s level and that you have sufficient height clearance for your custom-sized slats.

🔹 Step 2: Position the Base

• Place the rotational base in your desired location.
• If your divider spans a longer width, you may receive a two-part or extended base—align them so the sockets are evenly spaced.

🔹 Step 3: Insert the First Slat

• Line up the pre-installed bottom pivot pin with the first socket on the base.
• Lower the slat into the socket slowly and ensure it rotates freely.
• Use a level to confirm the slat is perfectly vertical.

🔹 Step 4: Secure the Top Base

• Align the top base directly above the installed slats, ensuring the socket holes match the slat positions. 
• With the help of a second person, slowly lower the top base onto the slats, guiding each one into its designated socket. 
• Press down gently to seat the base evenly across all slats. Once in position, use a level again to confirm vertical alignment and stability.

🔹 Step 5: Secure the Top (Optional but Recommended)

• Align the top bracket or plate over the slats and secure it using screws or adhesive based on your ceiling type.
• The bracket ensures alignment and prevents forward/backward movement.

🔹 Step 6: Adjust Slat Angles

Once all slats are installed, rotate each one to your desired position. You can angle them for partial privacy, leave them open for full transparency, or close them completely for visual separation.

🛠 Method 2: Fixed Floor-to-Ceiling Installation (Base-Free)

This method gives a more permanent, built-in appearance. Ideal for homeowners or design-heavy spaces.

🔹 Step 1: Prepare the Area

• Clean the floor and ceiling surfaces thoroughly.
• Mark the centerline or start edge with a chalk line for accurate slat placement.

🔹 Step 2: Install Bottom U-Channel

• Position the bottom U-channel bracket where the slats will begin.
• Secure it using screws (recommended) or heavy-duty construction adhesive.
• Ensure it is perfectly straight—use your level and chalk line.

🔹 Step 3: Install Top U-Channel or Guide Plate

• Measure the same offset on the ceiling and secure the top U-channel or alignment plate.
• Use anchors if installing into drywall or plaster.
• Keep the channel perfectly aligned with the floor bracket.

🔹 Step 4: Insert First Slat

• Insert the bottom pivot pin into the floor bracket hole.
• Raise the slat vertically and align the top pin into the ceiling channel.
• Adjust gently and check for vertical alignment using your level.

🔹 Step 5: Repeat for Remaining Slats

• Proceed to install the rest of the slats one by one.
• Maintain consistent spacing by using the built-in alignment or pre-measured channels.
• Check alignment and verticality after every few slats.

📌 Tip: It's best to have a second person assist in holding slats upright while you align and install.

🔹 Step 6: Final Adjustments

• Rotate each slat to test for smooth motion.
• Tighten any loosened brackets or secure the top edge with trim for a finished look.

💡 Styling and Usage Tips

Your Craftiva divider is more than functional—it’s also a statement piece. Here’s how to make the most of it:

• Angle the slats slightly open to create a visually dynamic, airy effect
• Use as a privacy screen in shared bedrooms, offices, or studios
• Divide an open concept living/dining area while keeping natural light flowing
• Place in front of large windows for a wood-filtered sunlight effect

🧼 Maintenance Tips

Your slats are crafted from premium Red Oak, built to last for years with simple care:

• Dust regularly with a microfiber cloth
• For deeper cleaning, wipe gently with a damp cloth (no harsh chemicals)
• Avoid excessive moisture
• Re-oil or refinish after several years if exposed to sunlight or high traffic

🧑‍🔧 Need Help?

If you have any questions during installation—or want to double-check your layout before securing anything—don’t hesitate to reach out.

📧 Email: sales@craftivaart.com
📞 Call or Text: 437-328-3350

Installing your Craftiva Rotating Wood Slat Divider is a rewarding DIY project that adds a custom-built look to any space. Whether you’ve gone with the freestanding base or built-in floor-to-ceiling style, the result is a stylish, functional divider tailored to your room and needs.

Take your time, follow each step carefully, and enjoy the transformation as your space evolves—one slat at a time.